My first cylinder!!!
Pics up soon! (prolly in 2-3 hours)
Lord Emeritus of Keypicking HallisChalmers
Posts: 2070
Joined: Mon Apr 28, 2008 2:46 pm
Location: Hell
HallisChalmers wrote:Ok, cough it up Jingles....what did you do? Did you get banned or what?
Lord Emeritus of Keypicking HallisChalmers
Posts: 2070
Joined: Mon Apr 28, 2008 2:46 pm
Location: Hell
Jinglesanator wrote:HallisChalmers wrote:Ok, cough it up Jingles....what did you do? Did you get banned or what?
Nope, the locksmith drives the free candy van and my mom thinks he is a pedophile.
Jinglesanator wrote:HallisChalmers wrote:Ok, cough it up Jingles....what did you do? Did you get banned or what?
Nope, the locksmith drives the free candy van and my mom thinks he is a pedophile.
awol70 wrote:schlage sc1 keyway.
count the cuts on your key ,i think you will find the last chamber is empty...
otherwise, it would be an sc4 (i have hand filled to many of these to count....)
Jinglesanator wrote:awol70 wrote:schlage sc1 keyway.
count the cuts on your key ,i think you will find the last chamber is empty...
otherwise, it would be an sc4 (i have hand filled to many of these to count....)
I think you're right, the last one is empty, I've slowly raked and only heard 5 clicks. Thanks for telling me the brand!
Jinglesanator wrote:Jinglesanator wrote:awol70 wrote:schlage sc1 keyway.
count the cuts on your key ,i think you will find the last chamber is empty...
otherwise, it would be an sc4 (i have hand filled to many of these to count....)
I think you're right, the last one is empty, I've slowly raked and only heard 5 clicks. Thanks for telling me the brand!
Oops, it does have 6 pins, just wished I knew how to open it to see what pins were inside.
Lord Emeritus of Keypicking HallisChalmers
Posts: 2070
Joined: Mon Apr 28, 2008 2:46 pm
Location: Hell
m0ose wrote: I looked kinda funny because I kept it in my chest pocket, making me look like I had some weird gorilla nipple, but hey, it worked.
m0ose wrote:Jinglesanator wrote:Jinglesanator wrote:awol70 wrote:schlage sc1 keyway.
count the cuts on your key ,i think you will find the last chamber is empty...
otherwise, it would be an sc4 (i have hand filled to many of these to count....)
I think you're right, the last one is empty, I've slowly raked and only heard 5 clicks. Thanks for telling me the brand!
Oops, it does have 6 pins, just wished I knew how to open it to see what pins were inside.
I can't see from the pictures, but it'll either be a retainer clip thingy or a screw cap thingy. (Hallis sent me one with a screw cap thing on the back)
Depending on what it is, you just take that off, take a small shim (can be made out of a coke can) and since you have the key, slide the shim all the way up between the pins. Then, pull the cylinder out.
Oops, I forgot to say, you'll need a follower. For a cheep follower, go to home depot and get a long, thick, industrial nail. Make sure it's one of the smooth stainless ones. Then, cut the tip off of it, and then cut up from that about the length of your cylinder, plus a half. Then, bam, instant follower. That is, assuming the nail fits your lock.
I personally just took my Krypto bible in and found a nail to fit. I looked kinda funny because I kept it in my chest pocket, making me look like I had some weird gorilla nipple, but hey, it worked.
Jinglesanator wrote:m0ose wrote:Jinglesanator wrote:Jinglesanator wrote:awol70 wrote:schlage sc1 keyway.
count the cuts on your key ,i think you will find the last chamber is empty...
otherwise, it would be an sc4 (i have hand filled to many of these to count....)
I think you're right, the last one is empty, I've slowly raked and only heard 5 clicks. Thanks for telling me the brand!
Oops, it does have 6 pins, just wished I knew how to open it to see what pins were inside.
I can't see from the pictures, but it'll either be a retainer clip thingy or a screw cap thingy. (Hallis sent me one with a screw cap thing on the back)
Depending on what it is, you just take that off, take a small shim (can be made out of a coke can) and since you have the key, slide the shim all the way up between the pins. Then, pull the cylinder out.
Oops, I forgot to say, you'll need a follower. For a cheep follower, go to home depot and get a long, thick, industrial nail. Make sure it's one of the smooth stainless ones. Then, cut the tip off of it, and then cut up from that about the length of your cylinder, plus a half. Then, bam, instant follower. That is, assuming the nail fits your lock.
I personally just took my Krypto bible in and found a nail to fit. I looked kinda funny because I kept it in my chest pocket, making me look like I had some weird gorilla nipple, but hey, it worked.
Would a pen work? I think I've seen someone use a pen as a follower, but do you unlock the cylinder with the key then shim it? Or do you just put the key in?
Users browsing this forum: No registered users