Page 1 of 1
Hasp for American series 7300 pad lock
Posted:
Tue Sep 08, 2015 6:55 amby escapenrv
Hi...
I got a 7300 series PL with the hasp cut away. I would like to replace the hasp if not too expensive. Length is not important. Good used is fine too. It is not a "collector lock", I'd just like to get it whole again.
Send me a PM with details and maybe we can work out a sale or trade.
Thanks
Steve
Re: Hasp for American series 7300 pad lock
Posted:
Tue Sep 08, 2015 7:05 amby GWiens2001
escapenrv wrote:Hi...
I got a 7300 series PL with the hasp cut away. I would like to replace the hasp if not too expensive. Length is not important. Good used is fine too. It is not a "collector lock", I'd just like to get it whole again.
Send me a PM with details and maybe we can work out a sale or trade.
Thanks
Steve
Think you mean the shackle. The hasp is what the lock is attached to on the gate, door, etcetera.
I'll check my 7200 for shackle diameter, etcetera, then see if I have anything along those lines, though it is doubtful.
Gordon
Re: Hasp for American series 7300 pad lock
Posted:
Tue Sep 08, 2015 7:51 amby escapenrv
Thanks GW...
You are right, I need a shackle and not a hasp. I need another cup of coffee I guess.
Steve
Re: Hasp for American series 7300 pad lock
Posted:
Tue Sep 08, 2015 8:14 amby escapenrv
I think the American 7300 series shackle comes in two sizes, both 7/16" dia and either 1-1/8" or 2.0" clearance.
Hope this helps...
Steve
Re: Hasp for American series 7300 pad lock
Posted:
Tue Sep 08, 2015 11:16 amby Fred B
take a look in here you may find that the same shackle fits other locks
Re: Hasp for American series 7300 pad lock
Posted:
Tue Sep 08, 2015 2:33 pmby escapenrv
Thanks for the link to the manual. I was wrong again !!!!
I need a shackle for a Series 7260 lock. It is 3/8" in dia and comes in 3 heights as listed (with American p/n)
1-1/8" APKG1581550
2" APKG1581570
3" APKG1581590
Any of these would work.
Sorry for all the mistakes...I'm still learning. Hopefully I'm learning faster than I'm forgetting.
Steve
Re: Hasp for American series 7300 pad lock
Posted:
Tue Sep 08, 2015 2:56 pmby GWiens2001
escapenrv wrote: Sorry for all the mistakes...I'm still learning. Hopefully I'm learning faster than I'm forgetting.
If so, you are doing better than I am.
Gordon
Re: Hasp for American series 7300 pad lock
Posted:
Wed Sep 09, 2015 10:56 amby escapenrv
Found one at MrLock.com. Thanks for all the help. Once again I found the help I needed from some great folks who hang out here.
Steve
Re: Hasp for American series 7300 pad lock
Posted:
Wed Sep 09, 2015 11:01 amby jeffmoss26
Mr Lock is a great source for parts! Glad you found what you needed
