Hasp for American series 7300 pad lock

[escapenrv]

Hi...
I got a 7300 series PL with the hasp cut away. I would like to replace the hasp if not too expensive. Length is not important. Good used is fine too. It is not a "collector lock", I'd just like to get it whole again.
Send me a PM with details and maybe we can work out a sale or trade.
Thanks
Steve

[GWiens2001]

Hi...
I got a 7300 series PL with the hasp cut away. I would like to replace the hasp if not too expensive. Length is not important. Good used is fine too. It is not a "collector lock", I'd just like to get it whole again.
Send me a PM with details and maybe we can work out a sale or trade.
Thanks
Steve

Think you mean the shackle. The hasp is what the lock is attached to on the gate, door, etcetera.

I'll check my 7200 for shackle diameter, etcetera, then see if I have anything along those lines, though it is doubtful.

Gordon

[escapenrv]

Thanks GW...
You are right, I need a shackle and not a hasp. I need another cup of coffee I guess.
Steve

[escapenrv]

I think the American 7300 series shackle comes in two sizes, both 7/16" dia and either 1-1/8" or 2.0" clearance.
Hope this helps...
Steve

[Fred B]

take a look in here you may find that the same shackle fits other locks

[escapenrv]

Thanks for the link to the manual. I was wrong again !!!!

I need a shackle for a Series 7260 lock. It is 3/8" in dia and comes in 3 heights as listed (with American p/n)

1-1/8" APKG1581550
2" APKG1581570
3" APKG1581590

Any of these would work.
Sorry for all the mistakes...I'm still learning. Hopefully I'm learning faster than I'm forgetting.

Steve

[GWiens2001]

Sorry for all the mistakes...I'm still learning. Hopefully I'm learning faster than I'm forgetting.

If so, you are doing better than I am.

Gordon

[escapenrv]

Found one at MrLock.com. Thanks for all the help. Once again I found the help I needed from some great folks who hang out here.

Steve

[jeffmoss26]

Mr Lock is a great source for parts! Glad you found what you needed