Rake Key Stuck
35 posts
• Page 3 of 3 • 1, 2, 3
Straight in from the front , had to wiggle lots and put a small curve in the tip !
Open Sez Me !
Re: Rake Key Stuck
Nozza, do you mean to say you gave one end of the shim a bit of a point to work your way over the lip that's around around the edge of plug?
Re: Rake Key Stuck
Gringo, I think hes talking about sliding the shim alongside the key to press back some tumblers in the bottom of the keyway.
The flange on the front of the plug is not part of the problem.
The flange on the front of the plug is not part of the problem.
Re: Rake Key Stuck
Gringo , i slid the shim under the bottom edge of the key (remember it was rotated 180) that pushed up the drivers so i could rotate the plug back to the closed position and the broken half of the key was easy to remove , it almost fell out when i tilted it , lol
Open Sez Me !
Re: Rake Key Stuck
Glad nozza sorted it for ya! Good bloke...
If any new guys read this.... Don't pick a lock that is in use!!!!!
If any new guys read this.... Don't pick a lock that is in use!!!!!
http://www.youtube.com/duction
www.Lockpick.co
www.Lockpick.co
35 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users