FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

question on the brinks schrouded.

<<

93940joe

Familiar Face

Posts: 51

Joined: Wed Apr 30, 2008 12:35 am

Post Sun May 25, 2008 6:32 am

question on the brinks schrouded.

it looks like it could be rekeyable/ic core? Yes or no?
<<

Site Admin

Post Sun May 25, 2008 10:09 am

Re: question on the brinks schrouded.

i'm not really sure to be honest, it looks like it can but i wouldnt have a clue how to get it apart without breaking it, i'd imagine someone on here would know.

Lew
<<

safety0ff

User avatar

Familiar Face

Posts: 42

Joined: Sun Apr 06, 2008 10:09 pm

Location: Canada

Post Sun May 25, 2008 10:54 am

Re: question on the brinks schrouded.

You have drill/remove the pin on the side of the lock to rekey it, there was some information on that on lp101 but I haven't found it in a while (I was looking for it a one point.)
<<

Josh

Prolific Poster

Posts: 803

Joined: Tue Mar 25, 2008 6:24 pm

Location: Stockton, CA

Post Sun May 25, 2008 9:31 pm

Re: question on the brinks schrouded.

yeah there is no getting it out nde...
here is a breakdown of the lock originally posted by mrdan on ezp
http://rapidshare.com/files/75489878/Br ... k-down.pdf
<<

safety0ff

User avatar

Familiar Face

Posts: 42

Joined: Sun Apr 06, 2008 10:09 pm

Location: Canada

Post Mon May 26, 2008 1:19 am

Re: question on the brinks schrouded.

Josh wrote:here is a breakdown of the lock originally posted by mrdan on ezp
http://rapidshare.com/files/75489878/Br ... k-down.pdf
No wonders I couldn't find it on lp101 if it was on ezp. :D Thanks!
<<

m0ose

User avatar

Active Member

Posts: 705

Joined: Tue May 06, 2008 5:13 am

Location: Western New York

Post Mon May 26, 2008 2:33 am

Re: question on the brinks schrouded.

Very awesome info! I haven't read it all, but if I were to drill it out, how would I go about re-filling the drilled part?
<<

Josh

Prolific Poster

Posts: 803

Joined: Tue Mar 25, 2008 6:24 pm

Location: Stockton, CA

Post Mon May 26, 2008 4:17 am

Re: question on the brinks schrouded.

thats a very good question. It would depend on the resources at your disposal. if you have a micro welder id use that. if not you may be able to use the ever useful duct tape.lol ;) or metal tape might do.... :D

Return to Uber-Noob

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware