best ic core

[vision688]

does anybody know if this best core is a k

[RangerJ03]

Hard to tell it's either a K or J ?? I'm kinda leaning toward J But not sure. try here for some good keyhole views.http://www.zipflockco.com/keyblanks.html

[awol70]

does anybody know if this best core is a k

no dice on the profile,but a question... what is the milled-out part below the plug for?

[awol70]

Hard to tell it's either a K or J ?? I'm kinda leaning toward J But not sure. try here for some good keyhole views.http://www.zipflockco.com/keyblanks.html

great find! thank you
this helps me a lot.

[vision688]

looked like someone drilled out an old core to put this one in i just found this lock on the street

[ToolyMcgee]

The shape of the uppermost ward on the right of the keyway matches, and the slight upward angle of the warding on the left is looking good. Your gigantic picture is almost a perfect 1 to 1 of the shadow pdf. It also helps that it's only gently used. The only way to be positive, however, is to check it to the J and K blanks. I would say K, but J from K and L from M are two of the tougher visual ID's.

-Tooly

[awol70]

looked like someone drilled out an old core to put this one in i just found this lock on the street

woohoo! groundscore!
nice find.
never seen a best drillpoint in that spot though...you think it was just amateur/sloppy drilling?
(like someone maybe bored the whole plug out instead of just drilling a new shearline?)

[ToolyMcgee]

Probably a point for leverage to remove the old core after the control lug had been drilled.

[RangerJ03]

Hard to tell it's either a K or J ?? I'm kinda leaning toward J But not sure. try here for some good keyhole views.http://www.zipflockco.com/keyblanks.html

great find! thank you
this helps me a lot.

You Bet Brother Found that site awhile back. Around the time I was trying to find a key for the Sargent with the dowald stamped on it. Thanks to you I found the key.