Tubular Lock Pick Tutorial Anyone?

[Mike51691]

Ive seen a vid on youtube were someone made a tutorial but looked ridiculously hard to copy. Anyone have any easy ways to make a 7 pin tubular lock pick as i dont have 80$ to buy one.

Get a tubular lock, Get a tubular key, Get a warding file, Get some spring steel stock, Get some rubber bands.

Learn it yourself.

[barbarian]

http://www.youtube.com/watch?v=4UNdk0JQXOg


You can use bobby pins instead of spring steel..

[clodester]

I will shamelessly plug my own vids at this point.

If you want a tutorial please have a look at this:

http://www.youtube.com/watch?v=u-RpEAWf ... annel_page

[uklockpicker]

Ball point pen lid !

[Windowstweeker]

you can make a tension tool for it and spp the pins, but you have to do it every time =/ around
i have seen one vid where they did it once and it turn completely, idk what was up with that

[quaiboi]

you can make a tension tool for it and spp the pins, but you have to do it every time =/ around
i have seen one vid where they did it once and it turn completely, idk what was up with that

that's harder to pick....i tried it....and gosh i suck.....i only use the tubular pick.....it's homemade....have a look at my vid

http://www.youtube.com/watch?v=apz-_jjT ... annel_page

and u dont have to use spring steel...i just used windshield wiperblades and grinded them until they could fit in the ....hole (the pin bitting)

[uklockpicker]

also check this vid out, ( home made tubular pick...

http://www.youtube.com/watch?v=gNFYNq9Y ... -fresh+div