.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Tue Jan 23, 2018 3:10 pm**

I have an abus n65/40 that's all gunked up and won't lock, is there any way to disassemble theese? No hidden screw that i can see, just a tiny hole next to the keyway. So.. Can i open this up to save it or will This never work?

Posted: **Tue Jan 23, 2018 3:19 pm**

Most padlocks are closed by plugs on the pin side. One plug per pin plus one plug which holds the core. To disassemble you have to find these plugs and pull or drill them out.

Posted: **Tue Jan 23, 2018 3:25 pm**

Ah okay, guess i'l have to learn more before i start with that project

Posted: **Tue Jan 23, 2018 3:57 pm**

You can see the plugs here in this video:
https://www.youtube.com/watch?v=qucKOd-p-mg

Posted: **Tue Jan 23, 2018 4:06 pm**

Cool, thank you!

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Abus n65/40

Abus n65/40

Re: Abus n65/40

Re: Abus n65/40

Re: Abus n65/40

Re: Abus n65/40