Page 1 of 1

Disassembling schlage cylinder

PostPosted: Sun Jul 16, 2017 9:18 pm
by pickmonger2
Is there a tool for taking the back off of a Schlage cylinder. ? It can be a bit tricky pushing in the pin that prevents rotating the cap on the back of the cylinder?

Re: Disassembling schlage cylinder

PostPosted: Sun Jul 16, 2017 9:58 pm
by just1pick+open

Re: Disassembling schlage cylinder

PostPosted: Sun Jul 16, 2017 10:02 pm
by just1pick+open
just1pick+open wrote:http://www.ebay.com/itm/WEISER-SCHLAGE-LOCK-CYLINDER-CAP-REMOVAL-TOOL-Locksmith-rekeying-pin-parts/332151225733?_trksid=p2045573.c100507.m3226&_trkparms=aid%3D555017%26algo%3DPL.CASSINI%26ao%3D1%26asc%3D41376%26meid%3Db5c7eb06e36b43c5b7ffa97ef22e8318%26pid%3D100507%26rk%3D1%26rkt%3D1%26

I used this link to show a low cost version. But I prefer and use this one. https://www.clksupplies.com/products/sc ... DQod8ewIlg

Re: Disassembling schlage cylinder

PostPosted: Sun Jul 16, 2017 10:15 pm
by pickmonger2
Thank you for those suggestions. My google skills need some work.

Re: Disassembling schlage cylinder

PostPosted: Wed Jul 19, 2017 12:11 pm
by dontlook

Re: Disassembling schlage cylinder

PostPosted: Wed Jul 19, 2017 12:48 pm
by WestCoastPicks
The resin plug follower from sparrows or lockpicking website has a Schlage tool on the back. And it's only a couple bucks.

Re: Disassembling schlage cylinder

PostPosted: Wed Jul 19, 2017 5:29 pm
by jeffmoss26
I have the cheap Weiser tool as a backup, but much prefer the one Lab sells. I got it with my Schlage pin kit several years ago.