Hard as Heck to pick this Schlage

[GWiens2001]

Got this Schlage lock today, and it is putting up a mother of a fight! The key works fine, and there are no security pins. Any ideas? ***asked with an innocent expression***

Front of lock





Yes, the new Schlage DiscLock. As pick resistant and bump-proof as an Abloy!

Gordon

[xeo]

That is both cool and uncool at the same time. Do you have a key?

[GWiens2001]

Yes, I do. The Schlage rim cylinder already had a DiscLock KIK in it, but no key. When I saw it in a bag-o-Abloys given to me by a local lockie, I just about flipped. My first thought was posting it. Rekeyed it to a key I already had, and thought I would share.

Gordon

[Oldfast]

That is both cool and uncool at the same time. Do you have a key?

Hahaaaaa! Too funny when I scrolled down to the picture.

[rai]

tension from the top of the stack, or the bottom?

Probably isn't a dedicated pick made for it yet, send one of those to lauren and it might happen....

[MrWizard]

That is a cool lock where is a pic of the working key?

[GWiens2001]

@Rai - tension from bottom

@mrwizard - here you go!



Gordon

[MrWizard]

I thought it looked exactly like an Abloy.
So Abloy and Schlage are now joined?
That is the first one of those I have seen.
I have seen removable cores for schlage with Abloy stamped on the face.

Richard

[Riyame]

I thought it looked exactly like an Abloy.
So Abloy and Schlage are now joined?
That is the first one of those I have seen.
I have seen removable cores for schlage with Abloy stamped on the face.

Richard

No, they are not joined. It is an Abloy KIK in a Schlage housing.

But when you get finished picking that one have a crack at this one

P1020856.JPG

[MrWizard]

WHOA! That one looks to be harder to crack.

[GWiens2001]

@Riy - Those Schlage locks are getting better all the time! . Doubt I will be successfully picking mine any time soon, let alone yours!

Gordon