.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Mon May 02, 2011 8:32 pm**

It's stamped PRR, stamped that it's made in Pennsylvania, and even give a year, 1966. I used a few "tension" bars to shim the shackle cam against the levers for binding and picked it with a taller hook. I especially like the brass shackle and pins.

The Logo

The keyway

Front

Back

Posted: **Mon May 02, 2011 8:33 pm**

sexy padlock there tooly! Nice job pickin' it too!

Posted: **Mon May 02, 2011 9:04 pm**

I think it is a Slaymaker as they made locks for the Pennsylvania Railroad (PRR) and were based in Lancaster Pa.

Nice lock!

Ed

EDIT: Some information, for a different railroad, but looks identical: http://www.proxibid.com/asp/LotDetail.a ... id=7684409

Posted: **Mon May 02, 2011 10:21 pm**

elbowmacaroni wrote:sexy padlock there tooly! Nice job pickin' it too!

Thanks 'Lbow, but it's a customers. Guy brought in a box of 'em and I went straight for the toughest pick. It was hard as shit to get any decent leverage on the shims.

edsmiley wrote:I think it is a Slaymaker as they made locks for the Pennsylvania Railroad (PRR) and were based in Lancaster Pa.

That's the one Ed. Except for a brass shackle, and this neatly stamped lettering.

Posted: **Fri May 27, 2011 6:40 am**

Nice lock Tooly!

I have a dumb question: why is the first picture blue? is that a photographic technique to show small marks better? Did you use a blue light to take the picture? Did you modify the image with photoshop?

Cheers

Posted: **Fri May 27, 2011 9:52 am**

It's the LED in one of my magnifying glasses.

Posted: **Fri May 27, 2011 10:01 am**

Thanks

Posted: **Fri Jun 17, 2011 11:34 pm**

I love these older locks, beautiful!

Posted: **Sat Jun 18, 2011 2:01 am**

Posted: **Sat Jun 18, 2011 7:23 am**

Tooly: You need a key made for it?

Posted: **Mon Jan 07, 2013 6:38 am**

I have the same exact lock. It's a slaymaker built for the Pennsylvania Railroad. Mine is stamped 1953, Lancaster PA.
Do you know how to make a key for it? My daughter is dying to get this thing working.

Posted: **Sun Jan 20, 2013 8:56 am**

I can make a key for it. The lock can be impressioned or decoded using 'L' wires referenced against the center pin.

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

5 Lever RR padlock

5 Lever RR padlock

Re: 5 Lever RR padlock

Re: 5 Lever RR padlock

Re: 5 Lever RR padlock

Re: 5 Lever RR padlock

Re: 5 Lever RR padlock

Re: 5 Lever RR padlock

Re: 5 Lever RR padlock

Re: 5 Lever RR padlock

Re: 5 Lever RR padlock

Re: 5 Lever RR padlock

Re: 5 Lever RR padlock