Window 980 Lock
Unknown cutaway obtained yesterday, only thing on the key is "Window 980" Front face of the plug is stamped "980". If anyone knows anything about this lock please let me know
https://imgur.com/a/uC8k6JQ
Keys are stamped
#1
#2
#3
Program Key
Master Key
Unstamped black "Key" which will be referred to as the bearing key
4 ball bearings are placed in to chambers 1 through 4.
Master wafers are placed through chambers 1 through 5.
The button on the front face is always free to move rearward and is sprung forwards.
When the button is pressed the mechanism moves backwards and reveals 6 small holes(one for all but 7) perfectly sized to trap ball bearings.
OPERATION
Insert program key, turn clockwise 90 degrees
Insert bearing key into the slot on the hole, chamber facing outwards
Press the button inwards while continuing to insert the bearing key, all 4 ball bearings will raise in to their chambers (the lock will now allow all 3 keys to work)
Turn key counter clockwise 90 degrees (To zero position) and remove bearing key and program key
TO PROGRAM FOR ONLY ONE KEY
Insert desired key
Turn 90 degrees clockwise
press button on plug face to capture ball bearings
Turn counter clockwise (If you used key #2 to program, #1 and #3 no longer work, the master key however will still work)
If anyone is interested in a video of its operation let me know, I need to buy a new battery charger and SD card for my camera.
https://imgur.com/a/uC8k6JQ
Keys are stamped
#1
#2
#3
Program Key
Master Key
Unstamped black "Key" which will be referred to as the bearing key
4 ball bearings are placed in to chambers 1 through 4.
Master wafers are placed through chambers 1 through 5.
The button on the front face is always free to move rearward and is sprung forwards.
When the button is pressed the mechanism moves backwards and reveals 6 small holes(one for all but 7) perfectly sized to trap ball bearings.
OPERATION
Insert program key, turn clockwise 90 degrees
Insert bearing key into the slot on the hole, chamber facing outwards
Press the button inwards while continuing to insert the bearing key, all 4 ball bearings will raise in to their chambers (the lock will now allow all 3 keys to work)
Turn key counter clockwise 90 degrees (To zero position) and remove bearing key and program key
TO PROGRAM FOR ONLY ONE KEY
Insert desired key
Turn 90 degrees clockwise
press button on plug face to capture ball bearings
Turn counter clockwise (If you used key #2 to program, #1 and #3 no longer work, the master key however will still work)
If anyone is interested in a video of its operation let me know, I need to buy a new battery charger and SD card for my camera.