Abloy classic disassembled
Posted: Sat Jan 04, 2014 4:25 am
Here is a pic of my Abloy Classic in parts. Much easier than the Abloy Disklock to pull apart. Only one sidebar and 8 discs instead of 11.
No spring loaded balls to jump over my shoulder either. A fairly simple lock once apart and making a key should be no problem.
Paper grid is 5mm x 5mm.
Disks are front from left to right and second row after that. 2 spacers between second last and last disk.
Cover disk has odd bit protruding into the half circle on straight bottom and last disk has tongue protruding into half circle from top.
Here is close up of the cover disk.
Disk 1, 3 and 7 have small half circle taken out below straight line which should do nothing if the key matches the cover disk.
I could file the cover disk and then I only need a simple half circle key but I don't want to modify it if possible.
Now all I need is a blank...
No spring loaded balls to jump over my shoulder either. A fairly simple lock once apart and making a key should be no problem.
Paper grid is 5mm x 5mm.
Disks are front from left to right and second row after that. 2 spacers between second last and last disk.
Cover disk has odd bit protruding into the half circle on straight bottom and last disk has tongue protruding into half circle from top.
Here is close up of the cover disk.
Disk 1, 3 and 7 have small half circle taken out below straight line which should do nothing if the key matches the cover disk.
I could file the cover disk and then I only need a simple half circle key but I don't want to modify it if possible.
Now all I need is a blank...