Familiar Face
Posts: 105
Joined: Tue Dec 31, 2013 11:40 pm
Location: Gowrie Junction, Queensland, Australia
My Abloy torn down
First pic shows the cylinder removed from the body. Pry up the circlip and remove.
Then you have to push from the front as you remove the plug internals or else some parts will stay behind.
And here is what's inside. 11 discs and spacers.
A top bar is shown as the little bent flat bar in the centre top and the 2 side bars are above that.
When you first slide out the centre watch the spring loaded cam that sits above the top bar.
And when you remove the front collar, there is ball bearing, spring and ball bearing in 2 positions.
And here is a pic of the internal of the core showing the side and top bar channels.
Disc 2 and spacer showing wide top groove and false gates.
More to add if I get it back together...
"I shall either find a way, or make a way myself."
“People who say it cannot be done should not interrupt those who are doing it.” ― George Bernard Shaw