Page 1 of 1

LOCKWOOD 234B45

PostPosted: Thu Sep 25, 2014 8:04 pm
by sbear2000
GEDC0190.JPG
I bought a used Lockwood 234B45 padlock and took it apart to clean it and the pin stack cover on the cylinder's bible was loose ; at closer inspection I noticed that the little catches that holds it on are broke. Would anyone out there have a good cover I could buy

if I could send the lock to someone because I noticed the key don't work all the time(worn pins??)to have it fixed.


thanks
Jerry

Re: LOCKWOOD 234B45

PostPosted: Thu Sep 25, 2014 8:15 pm
by GWiens2001
Pictures?

Gordon

Re: LOCKWOOD 234B45

PostPosted: Fri Sep 26, 2014 2:22 pm
by sbear2000
Well I took a chance and tore apart the Lockwood padlock . From the looks of it someone had it apart and changed out the key pins and they was a little to long and causing the plug to drag and the key didn't work I took a pin stack cover from a kik and replaced the bad one. Now I got a Lockwood padlock that opens like a new one