anyone know this keyway??

[james504]

i got these medeco's in yesterday and i was just wondering if anyone knew what keyway this is its alot tighter than the others iv had thanks!!
the last picture is of the lock with a biaxial key next to it so you can see the width ...


this one has a biaxial key on the side so you can see the width (its a thumb turn key)

thanks for the HELP!!

[james504]

sorry bout the bad pictures its verry hard to get a good keyway shot so i had to use a flashlight off to the side....

[spandexwarrior]

It's hard to tell from the pictures but I saw in your video that you had the boxes so there should be a label on them with the part number in a format like this: 00*00 0 X X X-X X X- XX- XX X.

The last "X" should be S=sub-assembled, P=Pinned, M=Mastered and the two "X's" immediately before that are the keyway. Examples are Y3, G3, X3, PA, etc.

The entire part number will also tell you exactly what the cylinders are for if you can find a match in the catalog.

-Brian

[james504]

its says G3S so is that the key way it also says 5G ??
but i got it from ebay opened so im not saying these are the boxes for them ...lol
shit! thanks bro i get it now so 2 are g3 kwy but the gold one i have no box for

[spandexwarrior]

So G3 is the "Gold" program for biaxial and is a very common keyway so it shouldn't be hard to get keys. They're the ones with a black card and say "Do Not Dup. w/o Card, Imprint, and Signature" (or something like that) on the back of the key. They even make aftermarket blanks... http://mysecuritypro.com/medecoa1638keyblanks.aspx.

-Brian

[james504]

thanks bro i found some cut ones with a card already thanks so much ! do you have any idea what the gold one is??