Page 1 of 2

System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 1:05 pm
by spuds
Need a little help here on this lock Just received it and has some Missing Parts
Cylinder Extension
Spring And Blade

Any info on this lock would be cool
Looking for parts and or new core with parts.
Box says Corbin Falcon Medeco Russwin Sargent Schlage Yale will fit it.
If any one has any thing that will make this lock work I'm sure we can work it out Thanks for the help.

Image

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 1:11 pm
by GWiens2001
Wondering if you even need those parts if you are installing a full size KIK cylinder instead of the Master lock cylinder. The blade would be the tailpiece.

Gordon

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 3:25 pm
by spuds
Don't Know Gordon I don't have one of them but will go look for one The core that came with it is small falls to far in and its a Master lock core LOL

What does one look like ? The full size KIK cylinder
will post photo of what i have.

core

Image

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 4:25 pm
by GWiens2001
The small one is the reason for the spacer (cylinder extension).

Gordon

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 4:38 pm
by Hugo Martel
You ned theses parts!! Look on HT4 youtube channel (LockPickingLawyer) he gutted one of theses padlocks

Hugo Martel :circlip:

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 4:55 pm
by spuds
Thanks Hugo Here are the parts i need looks to me you only need the Blade with the Small core but still need part in photo. Cylinder Extension Spring


Image

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 5:14 pm
by GWiens2001
Thank you, Hugo. Don't have one of these, and have not field stripped them. Only pulled out a couple cores to key to customer keys. Hence my question. :)

Gordon

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 6:55 pm
by spuds
So what would be the big core ? That does not need the spacer



GWiens2001 wrote:The small one is the reason for the spacer (cylinder extension).

Gordon

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 7:00 pm
by Hugo Martel
spuds wrote:So what would be the big core ? That does not need the spacer



GWiens2001 wrote:The small one is the reason for the spacer (cylinder extension).

Gordon




The big core is the KIK. you still need the extension It was a mistake. the part you dont need is the blade if you use a kik.

Hugo Martel :circlip:

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 9:09 pm
by spuds
LoL Ok thanks Still Looking for it !

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 9:37 pm
by Hugo Martel
maybe you could have one machined out of brass

Hugo Martel :circlip:

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Thu Dec 31, 2015 10:16 pm
by spuds
Even if i could machine one Don't think i do it in brass Think it would fail brass is soft .

Hugo Martel wrote:maybe you could have one machined out of brass

Hugo Martel :circlip:

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Fri Jan 01, 2016 12:19 pm
by Hugo Martel
spuds wrote:Even if i could machine one Don't think i do it in brass Think it would fail brass is soft .

Hugo Martel wrote:maybe you could have one machined out of brass

Hugo Martel :circlip:



brass wont fail!! the original part is made out of crappy contaminated Zinc!! brass is the best!!! the cylinder is made out of brass...

Hugo Martel :circlip:

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Fri Jan 01, 2016 1:31 pm
by HT4
spuds wrote:Don't Know Gordon I don't have one of them but will go look for one The core that came with it is small falls to far in and its a Master lock core LOL

What does one look like ? The full size KIK cylinder
will post photo of what i have.

core

Image


I doubt there's any way that cylinder would work. Only the full size kik and the extra large kik work. After all, the whole point of the lock is to use a full size core.

Re: System 29 Changeable Cylinder Padlock #29LH Wo

PostPosted: Fri Jan 01, 2016 1:33 pm
by HT4
spuds wrote:Thanks Hugo Here are the parts i need looks to me you only need the Blade with the Small core but still need part in photo. Cylinder Extension Spring


Image


You may not need that piece if you use a core with a sideways tailpiece.