.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

FarmerFreak sent me 2 'special' Schlage KIK's a while back and I finally got one of them picked! And so, on to the pics...

The keys were sent to me covered so this picture is to show that I still hadn't looked at the key before I picked it.


Here's the lock, key, and the tools used to open it.


Plug with the key inserted. Notice the plug is actually 2 pieces creating an extra shear line.


Here's the plug without its "hat".


Notice that, captive in the bible, there is another driver pin (a Medeco master pin according to FarmerFreak) that has a hole drilled in it for the spring to pass through. The second driver is not spring loaded and is present to prevent overlifting.


Here you cannot see the second driver because it has been allowed to fall further into the bible. This picture is simply to show that the top/second driver is not spring loaded.


The following picture is showing a recess that is present in all of the primary driver pins in which the spring rests.


Here they are...the springs, primary drivers, and key pins...EVIL!


HUGE THANKS, once again, to FarmerFreak for sending me this lock!

Damn, that is awesome. How long did it take you to crack it?

Damn dude! Nice work there... That is one nasty looking configuration for sure. Is that the pick you got from cowbite? If so, I'm glad you found it!

Yep, very cool lock. I've had the lock for a couple of months...I don't know how much time I've put into it...I'd say a couple of hours at least.

Thanks for the kind words pal! Farmerfreak can make some evil locks. He is obviously very meticulous about his work. And no, its not my Cowbite pick. Its one of mine and it has my first attempt at an AL handle on it. Its not pretty but it gets the job done. However, I did find my Cowbite pick!