Captain Contributor / Pick Synthesis Fabrication Process Execution Specialist / Global Moderator
Joined: Fri Nov 21, 2008 6:05 pm
Location: United States
This is a lock that was custom pinned by FarmerFreak, sent to Tooly, then sent to me. It has had some really cool modifications made to it and was a very fun pick! So, here are the pics...
The chambers in the plug are threaded...
The key pins are serrated. Also, notice the ASSA spools and the small springs that go through the brass inserts which are captive in the bible and are also spring loaded by the larger springs above them.
In the next picture the front chamber is loaded with everything except the driver pin...you can see how far out of the bible the skinny spring sits. For demonstration, the second chamber has a driver resting on the captive brass insert without the skinny spring that would normally be driving it.
Here is the key as well as the Peterson Pry Bar and home brew laminated hook I used to open it with.