FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

LaGard 33e Combination Change (W/O existing Combo)

<<

UnlockD

User avatar

Familiar Face

Posts: 172

Joined: Tue Dec 31, 2013 11:48 pm

Location: Kincardine, Ontario, Canada

Post Thu May 22, 2014 11:20 pm

LaGard 33e Combination Change (W/O existing Combo)

In the post I'll be explaining how to reset and change the combination of a LaGard 33e, without the original/existing combination. A few years ago I was contacted by a manager of a restaurant I used to work at. They had an ATM but no codes and the owner died. They wanted to confirm there was no cash in it so they asked me to take a look. Long story short a Safe & Vault Tech from the UK I had been speaking to for a while told me how to crack it open like a walnut. Anyhow, I was left with what I thought was a useless electronic safe lock until he told me how to reset and change the combination. Well he shared his knowledge with me and I'd like to do the same with this amazing forum and show anyone who owns one of these (without the combo) how to do it. 

This is how. 

1. Disconnect the battery and remove the sticker by cutting or peeling to expose the board. 

2. Insert a jumper into the two holes as seen in the picture. I used a paper clip as my jumper. 

3. Reconnect the battery and press 5 within 5 seconds. 

4. Disconnect the battery and remove the jumper. 

5. Plug the battery back in and enter the code '555555' then '000000' and then '555555.' 

6. You're now ready to enter in the 6 digit code of your choice. Enter your code, 123456 as an example, twice. 

You're now back in control of this lock. 
You do not have the required permissions to view the files attached to this post.
<<

Daggers

User avatar

Active Member

Posts: 585

Joined: Thu Jan 12, 2012 12:33 am

Location: Florida, US

Post Thu May 22, 2014 11:56 pm

Re: LaGard 33e Combination Change (W/O existing Combo)

That's pretty cool! Thanks for that!

how to crack it open like a walnut

How do you crack an electronic safe lock?
<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3565

Joined: Fri Oct 26, 2012 3:05 am

Location: Arizona, United States

Post Fri May 23, 2014 12:16 am

Re: LaGard 33e Combination Change (W/O existing Combo)

With a nutcracker, of course. :P

Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

UnlockD

User avatar

Familiar Face

Posts: 172

Joined: Tue Dec 31, 2013 11:48 pm

Location: Kincardine, Ontario, Canada

Post Fri May 23, 2014 12:31 am

Re: LaGard 33e Combination Change (W/O existing Combo)

I was referring to the ATM itself. I'd looove to share but.. rules and such. ;)
Surprisingly it doesn't take much; 3 tools.
<<

Gratefuldeadbolt

User avatar

Contributor
Contributor

Posts: 68

Joined: Thu Dec 20, 2012 4:15 am

Location: Ontario Canada

Post Fri May 23, 2014 12:49 am

Re: LaGard 33e Combination Change (W/O existing Combo)

I'd love to see you do that reset through the closed and locked door of a working safe ;)
<<

UnlockD

User avatar

Familiar Face

Posts: 172

Joined: Tue Dec 31, 2013 11:48 pm

Location: Kincardine, Ontario, Canada

Post Fri May 23, 2014 12:52 am

Re: LaGard 33e Combination Change (W/O existing Combo)

That'd be a damn big hole!
<<

Gratefuldeadbolt

User avatar

Contributor
Contributor

Posts: 68

Joined: Thu Dec 20, 2012 4:15 am

Location: Ontario Canada

Post Fri May 23, 2014 12:55 am

Re: LaGard 33e Combination Change (W/O existing Combo)

Or a bunch of tiny ones.... 2 for the paper clip.... One for power interrupt..... And maybe one or two to see what you are doing ;)
<<

UnlockD

User avatar

Familiar Face

Posts: 172

Joined: Tue Dec 31, 2013 11:48 pm

Location: Kincardine, Ontario, Canada

Post Fri May 23, 2014 3:36 am

Re: LaGard 33e Combination Change (W/O existing Combo)

I don't have a lot to contribute to this forum but I'm glad I can at least contribute this. Thanks to everyone and anyone that views, especially those that put this information to use.
<<

kerti

Familiar Face

Posts: 55

Joined: Tue Mar 31, 2015 9:48 am

Location: Ukraine

Post Wed Apr 01, 2015 11:17 am

Re: LaGard 33e Combination Change (W/O existing Combo)

Can you make some photos of the lock inside(other side with solenoid etc)?
<<

bitbuster

Prolific Poster

Posts: 760

Joined: Tue Aug 17, 2010 8:03 pm

Location: NW Wis

Post Wed Apr 01, 2015 11:30 pm

Re: LaGard 33e Combination Change (W/O existing Combo)

UnlockD.....is that the old style or new style 33e ?
"I dream of a world where, chickens can cross the road without having their motives questioned."......Ralph Waldo Emerson
<<

Anarchy_won

User avatar

Active Member

Posts: 651

Joined: Sun Oct 27, 2013 5:27 pm

Location: Ontario, Canada

Post Thu Apr 02, 2015 12:00 am

Re: LaGard 33e Combination Change (W/O existing Combo)

thanks for the info UnlockD :) if I ever run across one this will be handy ;)
(17:44:28) HAL 9000 Sez: LockSport is full of children who throw fits because low priced low security products sold in discount department stores do not meet their arbitrary expectations.
<<

MBI

User avatar

Site Owner

Posts: 1543

Joined: Fri Apr 04, 2008 3:25 am

Location: Utah, USA

Post Thu Apr 02, 2015 1:22 am

Re: LaGard 33e Combination Change (W/O existing Combo)

That's excellent info, thanks.
<<

kerti

Familiar Face

Posts: 55

Joined: Tue Mar 31, 2015 9:48 am

Location: Ukraine

Post Thu Apr 02, 2015 8:06 am

Re: LaGard 33e Combination Change (W/O existing Combo)

bitbuster wrote:UnlockD.....is that the old style or new style 33e ?

That is a new style LG33e.
<<

slaughter

Newbie

Posts: 1

Joined: Sun Apr 21, 2019 11:12 pm

Post Mon Apr 22, 2019 1:43 am

Re: LaGard 33e Combination Change (W/O existing Combo)

i used this info to fix my atm lock. it was locked open and a few people messed with it and none of the 6 digit codes would open the door. it took me a few tries and i had to remove some of the clear coat from the circuit board to make good contact with the spots for the jumper.
thank you for the info!!!!!
:razz:

Return to Safes, Strongboxes & Combination Locks

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware