Help
Posted: Sat May 03, 2014 8:57 am
Oldfast,
Hello All,
I Need some help. I'm stuck on graphing. Can you try and break it down a little for me. I guess I'm kind of a knucklehead. Having trouble with the whole process. I tried to make my first graph and all the RCP were the same? So that part of the graph came out like a straight line. The LCP looked to me to have slight variations in 1/4 increments but nothing major. I must be doing something wrong. Also, if I start out AWR and park all 3 wheels at 0 then spin left to find contact points which are L-7 1/4 and R-15 then back to 0 and move all wheels to 2/5 and back to contact points and then back to 2.5 and move wheels to 5 etc. what happens when I get to the contact points? Do I keep moving all wheels the same through the contact area?? Do I keep taking readings in the same manner? Also, Amplifying is the same as regular graphing except for you check 1 number at a time starting with 6 numbers on each side of the suspected target number, Correct?? My cutaway doesn't have 1/4 or 1/8 markings so I have to guess. Any suggestions?
Any help would be appreciated.
Thanks
Rick
Shadowlock
Hello All,
I Need some help. I'm stuck on graphing. Can you try and break it down a little for me. I guess I'm kind of a knucklehead. Having trouble with the whole process. I tried to make my first graph and all the RCP were the same? So that part of the graph came out like a straight line. The LCP looked to me to have slight variations in 1/4 increments but nothing major. I must be doing something wrong. Also, if I start out AWR and park all 3 wheels at 0 then spin left to find contact points which are L-7 1/4 and R-15 then back to 0 and move all wheels to 2/5 and back to contact points and then back to 2.5 and move wheels to 5 etc. what happens when I get to the contact points? Do I keep moving all wheels the same through the contact area?? Do I keep taking readings in the same manner? Also, Amplifying is the same as regular graphing except for you check 1 number at a time starting with 6 numbers on each side of the suspected target number, Correct?? My cutaway doesn't have 1/4 or 1/8 markings so I have to guess. Any suggestions?
Any help would be appreciated.
Thanks
Rick
Shadowlock