Sun Feb 13, 2022 1:28 pm by UncleBobsPotato
First post from a new guy. I bought a 6730 and made my own cutaway because MBA was out of premade ones. I got my first solve on it last night. Found a gate at 65, identified it as wheel 1. Then parked wheel 1 on 65 and identified a gate at 45 (which had showed a decent amount on the first graph also). Identified that gate as being on wheel 3 then brute forced wheel 2 until solve at 65-32-45. It worked but I know I spent way too much time spinning due to not grasping how to park wheels without dialing all 3 numbers.
Other than just a ton of practice is there a better way to grasp how to more efficiently move the wheel pack and park wheels during high/low testing and brute forcing the final wheel?
Thanks! And this place is great, so much info here. I initially cut the lever stop off when making the cutaway but glued it back on. It isn't pretty but it does work. Removing the lever stop does not make the lock non-functional, just causes you to have to push the lever down to lock it back.
You do not have the required permissions to view the files attached to this post.