For reference if useing the framon 2 Pg 202 .
Block 1 .
Cutter fc8612 as Jeff as already pointed out it's the half step depth
Full step as increments of 0 .30 inch
Example. Cut Depths 1 to 6
1. 266
2. 236
3. 206
4. 176
5. 146
6. 116
all have steps of 0.30 " Full cut
Half step depth cuts
0 to X all have increments of 0.15 inch
0. 266
1. 251
2. 236
3. 221
4. 206
5. 191
6. 176
7. 161
8. 146
9. 131
X . 116 medeco
All have a increments of 0.15 inch in depth cut known as a ( half cut )
Remember a 6 full depth cut is the same as a X half cut both are ( 116 inch depth of cut ) .
Medeco keymark and biaxial or BI - AX have there own depths Of cut and increments again differ fyi .
RingoStatistics: Posted by 10ringo10 — Sun Jun 26, 2022 8:07 pm
]]>